When attempting to install Windows on Mac, Bootcamp may be stuck on "The installer disc could not be found. Insert your Windows installer disc and wait a few seconds for the disc to be recognized." The error is likely caused by issues on the installer disc, the Windows ISO file, or the internal hard drive.
Boot Camp Installer Disc Could Not Be Found
Here are the solutions to try if you can't install Windows 10, Windows 7, or other versions on Bootcamp due to the error reading, "The installer disc could not be found. Insert your Windows installer disc and wait a few seconds for the disc to be recognized."
If the Windows version you intend to install isn't compatible with your Mac models, Boot Camp Assistant will likely pop up "The installer disc could not be found." when installing Windows. That's why you may get "The installer disc could not be found." on a 2015 Mac when using a Windows 7 ISO file.
Suppose you have followed every step correctly to install Windows on Mac but still experience the error "The installer disc could not be found." on Bootcamp. In this case, you likely have an incomplete or corrupted Windows ISO file. To eliminate the error, you need to download a new ISO file and repeat the installation in Boot Camp.
Bootcamp reports the "The installer disc could not be found." error more often on older Mac models, mainly when users use an external USB installer disc on models earlier than 2012. The issue is that 2011 or older Macs can't utilize a USB installer, as they don't support EFI boot.
If your Mac belongs to one of the following models, it requires an external USB drive to install Windows on Mac. However, if the USB stick isn't properly formatted, it may result in the error, "The installer disc could not be found. Insert your Windows installer disc and wait a few seconds for the disc to be recognized."
If your Mac has two physical disks and you keep receiving "The installer disc could not be found." when installing Windows on it, you need to back up your Mac with Time Machine, erase both physical disks, create a single logical Fusion drive following this guide from Apple. After fixing the split Fusion drive, you should be able to install Windows without errors.
If you cannot install Windows 10/7 with Bootcamp, as it's stuck on "The installer disc could not be found," try installing from a Windows USB installer. Note that installing Windows on Mac after booting from a USB installer is only applicable to Mac models in 2012 and later.
I could possibly purchase an external DVD drive and then figure out how to create a bootable Windows disk using that... but that seems like a lot of effort for something that might not even work.
When I installed High Sierra on my 2011 iMac, firmware upgrades were installed that allowed the Mac to EFI boot the Windows 10 installer from an ExFAT formatted internal or USB drive. Originally, I was required to use an optical drive to install Windows, but now I can also use a flash drive or install directly from the ISO file. I do not know if the same would be true for your 2009 iMac.
The problem, with the newer answers, is that you want Windows 8.1 and the instructions are for Windows 10. The solution may simply require substituting 8.1 or 10 in the instructions. Otherwise, the instructions could be modified where you would EFI boot from Window 10, but install Windows 8.1 to BIOS boot. This would be similar to the question Dual Boot Win 7 on MBR with Win 10 on GPT.
The problem is that when I get to the "Start Windows Installation" step in boot camp, it asks to insert the Windows disk. I inserted the USB drive, and it appears on the desktop, however, when I click Start Installation, I get the following error message:
I'm having the exact same problem. I tried holding the option key when rebooting to see if I could boot from the USB key but I could not find a way to do this, so I installed rEFIt (then rebooted twice!) and THEN plugged in the USB key and the next time I rebooted it did show up as an option to boot from the USB key.
I inserted the USB drive, and it appears on the desktop, however, when I click Start Installation, I get the following error message: The installer disc could not be found. Insert your Windows installer disc and wait a few seconds for the disc to be recognized. Bootcamp windows-7. Hi, I'm trying to install windows 10 on my mac via boot camp. I've followed all the steps, but go stuck at the part where you have to select the drive you want to install windows onto. I received the message 'Installer disc could not be found' when I click continue, and I can't seem to find. Some of the common issues with Boot Camp Assistant are not enough space on USB, installation errors, startup disk partition errors, file system errors, ISO mounted errors and so on. In most cases, it is either a problem with the Windows 10 installation files or Boot Camp's ability to handle those files and put them on a FAT32 disk, which can.
Jul 11, 2019 In certain circumstances, Boot Camp Assistant might say that your bootable USB drive could not be created, or that there is not enough space available on the disk. To resolve, complete these steps: Make sure that you're using an external USB flash drive with a storage capacity of 16GB or more. Install the latest macOS updates. Run Bootcamp (both boxes checked) - Download latest Windows support software - Install Windows 7; Bootcamp gives me this message: The installer disc could not be found. Insert your Windows installer disc and wait a few seconds for the disc to be recognized.
If you check the first option - Create.. - it automatically runs the Download. step and copies parts of your ISO and the BC drivers to the USB. Now if you separately un-check the Create. option, and check only Download. it deletes the installer you just created and creates a non-bootable BC Drivers USB which no longer has the installer.
I have tried absolutely everything I can find online to remedy this, and I just can't get anything to work properly. I'm trying to install Windows 7 on my iMac.I downloaded the Windows 7 ISO from Microsofts website (I have a product key already). I have burned it at least 6 different times, with different burning utilities (Including Toast 11 Ultimate) to no avail. Every time I try to use boot camp I just get the error 'The installer disc could not be found'. Doing it another way I have found online, and holding down alt/option on boot only brings up my main Mac HD, and a recovery partition. I have also tried using a USB Drive, formatted every which way I have read. NOTHING will recognize as a Windows installer disc (says boot camp). I did however get it to locate the 'Installer disc' by mounting the ISO to a virtual drive, but then upon reboot, I just get the error message 'NO BOOT DEVICE'. SO. I have also tried one other Windows 7 CD (The Restore CD from my laptop) , and a legit Windows XP CD to no avail. I am LOSING MY MIND. Help.
Hey Ben, It doesnt work with me, Because I only have 2 options. Wich are the Download windows support files, and install windows :/ So i guess my hardware is not compatible with that unfortunatly :/ (my bootcamp version is version 5..)
You could get extreme and pull out the hard drive from your 08 Macbook, connect it to your PC (either via a usb drive caddy or directly if possible) use partition magic or similar to repartition it, adding an NTFS partition, installing Windows 7 onto that partition, then reconnecting it to your Macbook and seeing if you can hold Option and see that bootable partition.
I have converted my USB stick as Windows bootable ISO image with help of Boot camp Installer. In the same setup, the Boot Camp asked for Partition and then install. I did the partition and then the Mac restarted and then it was asking for disk and not the pen drive ?
Over the weekend I wanted to install Windows in a bootcamp partition so the kids can use it to do their Chinese homework. The Chinese homework CD unfortunately only works in Windows so I had no choice!! I guess I could have taken other routes, like installing Windows in a VM or something, but I figure that Mac has this awesome tool called bootcamp, why not use that?
Well, how wrong I was! I went through a whole day of head-scratching, temper-inducing, word-cussing, USB-swapping and machine-rebooting exercise of getting Windows installed in the bootcamp partition. I almost went as far as buying a replacement superdrive for the macbook, but at the end I finally was able to get Windows 7 onto the Macbook.
At this point, the Windows installer has copied all the files to the external drive, and has set up a boot environment that you can start your Mac from. Next time you boot from the external drive, Windows will complete the installation process.
If I use the bog standard Bootcamp installer it loads the Latest Bootcamp Drivers Prior to installation & then installs them automatically after it has installed Windows 10 I have no choice of the Bootcamp Drivers installing untill after Logging into My Windows account with NO WI-FI or blutooth drivers; that in itself is bad enough but my routers in the loft and requires roughly 50ft of ETHERNET CABLE to be plugged in before I am able to use any online updates or regerstering my account.
I have run into a snag, and am not sure how to resolve it. When I get to the step of selecting the bootcamp.vmdk file as the existing hard disk file to use, it gives me this error message.Failed to open the disk image file /Users/macuser/bootcamp.vmdk.
When you hold the option key during boot, you should see all drives capable of booting. If you have both an internal bootcamp partition and an external bootcamp drive, you should see both as well as the Mac OS partition. If you are not seeing the external EFI drive then it is not bootable and something is wrong with it.
Are you sure? If you cloned the internal bootcamp partition to the external drive, it will look the same until you make some changes to it, like installing additional applications or UI personalizations. You can also easily tell by opening Windows Disk Manager. 2ff7e9595c
Comments